View ISL1532_709744.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

(R)
ISL1532
Data Sheet October 10, 2006 FN6173.1
Dual Channel Differential DSL Line Driver
The ISL1532 is a dual channel differential amplifier designed for driving full rate ADSL2+ signals at very low power dissipation. The high drive capability of 450mA makes this driver ideal for DMT designs. It contains two pairs of wideband, high-voltage, current mode feedback amplifiers designed on Intersil's HS30 Bipolar SOI process for low power consumption in DSL systems. These drivers achieve an MTPR distortion measurement of better than 70dB, while consuming typically 5mA per DSL channel of total supply current. This supply current can be set using a resistor on the IADJ pin. Two other pins (C0 and C1) can also be used to adjust supply current to one of four pre-set modes (full-IS, 3/4-IS, 1/2-IS, and full power-down). The ISL1532 operates on 5V to 15V supplies and retains its bandwidth and linearity over the complete supply range. The device is supplied in a thermally-enhanced 20 Ld HTSSOP and the small footprint (4x5mm) 24 Ld QFN packages. The ISL1532 is specified for operation over the full -40C to +85C temperature range. The ISL1532 provides larger output swing at heavy loads, higher slew rate, and higher bandwidth while maintaining pin-to-pin drop-in compatibility with the EL1528. The ISL1532 integrates 50k pull-up resistors on C0 and C1 pins.
Features
* 450mA output drive capability * 44.4VP-P differential output drive into 100 * 5V to 15V supply operation * MTPR of -70dB * Operates down to 2mA per amplifier supply current * Current control pins * Channel separation - 80dB @ 500kHz * Direct pin-to-pin replacement for EL1528 * Pb-free plus anneal available (RoHS compliant)
Applications
* Dual port ADSL2+ line drivers * HDSL line drivers
Get Full Datasheet
ISL1532 (20 Ld HTSSOP) TOP VIEW
Pinout
ISL1532 (24 LD QFN) TOP VIEW
20 VOUTA 24 C1AB 23 C0AB
22 VS-
21 NC
C0AB 1 C1AB 2 19 VINA18 VINB17 VOUTB VINA+ 3 VINB+ 4 GND 5 IADJ 6 VINC+ 7 VIND+ 8 C1CD 9 C0CD 10 THERMAL PAD
20 VS19 VOUTA 18 VINA17 VINB16 VOUTB 15 VOUTC 14 VINC13 VIND12 VOUTD 11 VS+
VINA+ 1 VINB+ 2 GND 3 IADJ 4 NC 5 VINC+ 6 VIND+ 7 VS+ 10 C1CD 8 C0CD 9 NC 12 NC 11 THERMAL PAD
16 VOUTC 15 VINC14 VIND13 VOUTD
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright (c) Intersil Americas Inc. 2006. All Rights Reserved. All other trademarks mentioned are the property of their respective owners.
ISL1532
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation's quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com 2
FN6173.1

▲Up To Search▲

Price & Availability of ISL1532

	To Download ISL1532 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .